INDUSTRIAL MARKING EQUIPMENT & SUPPLIES

DURADOT

In-Line CNC Marking System

DuraDot

CLICK TO VIEW DATA
CLICK TO VIEW DIMENSIONAL DRAWING

The DuraDot is a spindle-actuated mechanical dot peen marking attachment for use in CNC machining centers. It creates alpha-numeric characters, logos, bar codes and much more in precise low stress dot patterns.

The DuraDot does not require compressed air or electric. It easily integrates into vertical or horizontal machining centers, milling machines and similar CNC machines with rotating spindles. It can be manually loaded or traverse through automatic tool changer processes.

Marking capabilities of the DuraDot depend only on the capabilities of the machine’s engraving or CAD software used. Dot density is adjusted thru RPM and feed rate settings.

Marking window sizes are limited only by the machining center itself. The DuraDot is a cost-effective in-line alternative to dot peen marking machines used in secondary processes.

A variety of materials up to 55 HRc can be marked with the carbide stylus including heavy metals, aluminum, non-ferrous metals and plastics.

0123456789

Char Size Marking
Plane		 RPM Feed Rate
6mm 2.5mm 850 500mm/min
5mm 2.5mm 850 500mm/min
3mm 2.5mm 750 250mm/min
2mm 2.5mm 750 250mm/min

IN-LINE MARKING HEAD

In-Line Marking Head

Uses steel marking type or logotypes.

With the In-Line Marking Head it’s possible to mark the part while still setup in the machine, eliminating costly secondary operations, additional equipment and labor.

CLICK TO VIEW DATA
CLICK TO VIEW DIMENSIONAL DRAWING

FEATURES & BENEFITS:

  • The patented In-Carousel design and compact size easily position in tool magazine or turret without interfering with machine components or work piece.
  • Uses single character type or logos -- up to fifteen in maximum 1/4" character height
  • Marks in less than one second
  • Adjustable and Uniform marking dept
  • Precise marking location repeatability
  • Positive Locking
  • Easy type change-over